Electronic System Design Manufacturing (ESDM)

Process name:- Electronic System Design Manufacturing (ESDM)

Process type :- Offline- on site

Work load :- Unlimited

Sign up :- Direct with Government’ Authorized Vendor

Slot :- 10 slot

Number of seats: Center can start the work from any number of seats but the minimum number of seats on which the work can be issued will be 10 seats.

Duration of contract: 12 months initially, extended up to 11 months depending upon centre performance...


Project consistency: Long term basis (center performance will play a big part).

}  Objective of The Program
  1. Develop human Resource at various levels including Certificate, Diploma, Post Graduate,  and Research Professionals with adequate competence levels
  2. Design and conduct Employment and Self-employment linked quality and cost effective education / training – Entrepreneurial development
  3. Promote affordable Electronics Design & Technology targeted towards rural / underdeveloped areas
  4.  Make available Design Consultancy, Product Development & Technical support services of international standards to the Indian industry

Benefits To The Centre
  1. Short Course Duration => 1 Months To 3 Months.
  2. High Monetary Rewards => 3000 To 7500 Per Student.
  3. Good Monetary Reimbursement Structure , 50% On Student Passing And 50% On Student Placement.
  4. Quick Centre Approval For The Course.
  5. Job Placement Available on ESDM Website.

Mandatory Details For ESDM Program
  1. Student should have Aadhaar Number for sure. If Aadhaar Number is not there at the time of registration, process should start immediately and by the time of Assessment, Aadhaar number should be generated and updated on our portal.
  2. Candidate’s name cannot be changed post registration.
  3. Use Biometric attendance/ Attendance Register for all Training.
  4. Caste category document, if applicable is also to be submitted along with registration for availing benefit in full reward money reimbursement.
  5. Income certificate, if applicable is also to be submitted along with registration for availing benefit in full reward money reimbursement under EWS quota.
  6. Educational Qualifications should be according to that specified against each job role and supporting documents will have to be submitted.


Payment:

Payment cycle will be  as per government guideline.

Detailed quality report also available upon center request... the center can also opt for a third party check of quality depending upon mutual consent.


Documents/Certifications Required

1. Company Profile
2· l.o.i
3· office pictures
4· company's reg. copy
5· current account details along with swift code
6· Director’s profile
7. team leader profile
8. agents details along with identity.
9· pan card
10· identity and address proof of director
11. company's pan card
12. balance sheet last 1 year.

Steps of going Live:

1. Profile Selection
2. MOU
3. Conference call with Management team
4. Questionnaires
5. Online Screening
6. SLA sign up in the centre
7. Training Onsite/Online
8. Live Going

Infrastructure requirements of the center
  1. Maintaining PMKVY posters outside the center.
  2. Maintaining PMKVY posters at Reception, Classrooms & Labs.
  3. Maintaining the PMKVY Admission Forms & Feedback Forms.
  4. Maintaining PMKVY Attendance Register.
  5. Maintaining PMKVY Syllabus of the respective Courses.
  6. Maintaining Courseware- 1 Copy of Course Book.
  7. Maintaining Trainers Updated CV.
  8. Compulsory Trainer Has to attend & clear the Telephonic Round Of Interview.
  9. Compulsorily the Trainer also has to attend the TOT session (Training of The Trainers) at the nearest Location.
  10. Maintaining the Franchise Agreement.
  11. Proper Awareness about the PMKVY Scheme amongst the Center peoples, Trainer’s & Trainee’s.
NOTE:
•      The above mentioned point have to be undertaken & maintained timely.
•      To prevent center from getting blacklisted.
•      To center could be audited “N” number of times by various parties at the time like PMKVY/NSDC/TP/THIRD PARTY AUDIT.

Photographs requirements of the center
  1. Picture of the Center From the Road approach.
  2. Picture of Classrooms.
  3. Picture of Reception.
  4. Picture of Lab ( with all the requirements available as per sitting capacity of 30 students.)
  5. Pictures of tools & equipment, list is as follos:
       ü   Computers
       ü   Laptops.
       ü   Laser Printer.
       ü   Ink Jet Printer.
       ü   Dot Matrix Printer.
       ü   Scanner.
       ü   Soldering Iron.
       ü   Multimeter.
       ü   Post cards.
       ü   Screw Drivers.
       ü   Network Switches.
NOTE:
•      If the Center satisfies the above mentioned requirements as per the PMKVY V2.0 guiedlines, then only the Center would be Registered & Audited.
•      The entire requirement has to be submitted along with the center detail for registration.
•      If any point/bulletin is missed out at the time of submitting, then the gape has to fill at the earliest, unless the center will not be registered & audited.
•      Avoid delay in submission of details.
•      To center could be audited “N” number of times by various parties at the time like PMKVY/NSDC/TP/THIRD PARTY AUDIT.

Consultancy Charge : 2,50,000 + Service Tax ( Which Is not Refundable)

Basic Sign-Up Procedure

Step 1: Send an email with following details

1. Process Name (Visit Available PROJECTS)
2. No. of seats/slots
3. When do you want to signup?
4. Company Profile
5. Any Queries/doubts

Step 2: I will forward it to my client and book appointment for you.

Step 4: Visit client's office with basic documents required:

1. Authorised person's ID Proof
2. Company Registration Proof
3. Office Address Proof
4. Center SnapShots

Step 5: Do the signup and get live.

- Copyright © BPO Campaigns -BPO Campaigns -